I posted a question over in the Q&A Android forum about a large number of error 11 returns on my Android 5.1.1 phone (Galaxy J3 2016). The phone does return some valid work units, and the work units seem to complete when they are sent to someone else's computer, so I suspect my phone is acting up, but I don't really have any good leads. Does anyone have any thoughts?

Thanks!

See my reply to MeeeK further down this thread.

Are you sure that the tasks that were successful when sent to someone else used exactly the same version as on your Galaxy?

For example, also using the Android Linux version of 4.20, or some other variety of 4.20 instead?

The only failed task I could find for you has another task sent to someone else, but not finished yet.

I posted a question over in the Q&A Android forum about a large number of error 11 returns on my Android 5.1.1 phone (Galaxy J3 2016). The phone does return some valid work units, and the work units seem to complete when they are sent to someone else's computer, so I suspect my phone is acting up, but I don't really have any good leads. Does anyone have any thoughts?

Thanks!

See my reply to MeeeK further down this thread.

Are you sure that the tasks that were successful when sent to someone else used exactly the same version as on your Galaxy?

For example, also using the Android Linux version of 4.20, or some other variety of 4.20 instead?

The only failed task I could find for you has another task sent to someone else, but not finished yet.

Dear Robert,

They've fallen out of my history already (they were earlier this week; my phone doesn't get consistent WU's from Rosetta even though I have it overbalanced towards Rosetta). I do think most of the ones completed successfully by other hosts were on 4.20. Some of them were Windows or Linux, but I do recall seeing at least one successful one done by ARM on 4.20. Would it make sense to dial up the BOINC log level towards 5 and monitor for more WU's?

Thanks!

[snip]

Dear Robert,

They've fallen out of my history already (they were earlier this week; my phone doesn't get consistent WU's from Rosetta even though I have it overbalanced towards Rosetta). I do think most of the ones completed successfully by other hosts were on 4.20. Some of them were Windows or Linux, but I do recall seeing at least one successful one done by ARM on 4.20. Would it make sense to dial up the BOINC log level towards 5 and monitor for more WU's?

Thanks!

I was talking about the several different versions of 4.20 for different operating systems.

As for the BOINC log level, I've never used that, so I don't know whether it will be useful or not.

its frustrating to see the wasted time without result and no points

If you check, you'll find they are being awarded points retrospectively according to their runtime.
A clean-up job periodically runs and awards credit as it's not your fault

---

Hi,

today all my R@H jobs terminated with error, named "RSA key check failed", directly after BOINC start.
3 tasks were running yesterday, 4 have not yet been started before.
The job names were different "hgfp3_xx", "rep212_xx", "rep1153_xx" and "Junior_HalfRoid_xx".
Error code and error message are always the same.

-185 (0xFFFFFF47) ERR_RESULT_START

Here complete message from one example job that already run before.
https://boinc.bakerlab.org/rosetta/result.php?resultid=1186603301

<core_client_version>7.16.5</core_client_version>
<![CDATA[
<message>
app_version download error: couldn't get input files:
<file_xfer_error>
  <file_name>database_357d5d93529_n_methyl.zip</file_name>
  <error_code>-120 (RSA key check failed for file)</error_code>
  <error_message>signature verification failed</error_message>
</file_xfer_error>
</message>
]]>

Today new jobs were downloaded and run smoothly, so I think there is no general problem.

Any idea what went wrong?

Hi,

today all my R@H jobs terminated with error, named "RSA key check failed", directly after BOINC start.
3 tasks were running yesterday, 4 have not yet been started before.
The job names were different "hgfp3_xx", "rep212_xx", "rep1153_xx" and "Junior_HalfRoid_xx".
Error code and error message are always the same.

-185 (0xFFFFFF47) ERR_RESULT_START

Here complete message from one example job that already run before.
https://boinc.bakerlab.org/rosetta/result.php?resultid=1186603301

<core_client_version>7.16.5</core_client_version>
<![CDATA[
<message>
app_version download error: couldn't get input files:
<file_xfer_error>
  <file_name>database_357d5d93529_n_methyl.zip</file_name>
  <error_code>-120 (RSA key check failed for file)</error_code>
  <error_message>signature verification failed</error_message>
</file_xfer_error>
</message>
]]>

Today new jobs were downloaded and run smoothly, so I think there is no general problem.

Any idea what went wrong?

It looks like all of the successful tasks extracted part of the input from one database zip file, and all of the failed tasks tried (and failed) to extract something similar from a different database zip file.

This looks likely to mean that the database zip file with the longer name downloaded with an error, and therefore caused all of the tasks trying to use it to fail.

If someone can tell you how to download a replacement for the file with the error, this should fix the problem. I'm sorry that I can't do that.

The cause MIGHT be an overly aggressive antivirus program somewhere along the path from the download server to you chopping off the end of the file, but it's hard to be sure unless you can compare the copy with the error to a corrected version.

The databases are all in the root of the downloads directory
https://boinc.bakerlab.org/rosetta/download/database_357d5d93529_n_methyl.zip

---

Rosetta Moderator: Mod.Sense

Thank you, but there was no need for me to interfere manually.
The database has been downloaded again automatically, the new jobs are running without problems.
I just wanted to know what happend.

I think I am having an issue with Rosetta handling PC shutdown incorrectly. My OS is Windows 7.
I noticed that I started getting "calculation error" for running tasks when I shut down my PC with Rosetta running. An example of such task would be
https://boinc.bakerlab.org/rosetta/result.php?resultid=1192146960
If I use the BOINC interface to pause tasks before shutdown, they would pause normally and would be able to be resumed normally after boot.

While manual suspend/restart is not something I can't do, maybe this issue still needs to be addressed?

Cannot upload my wus (and the upload server seems ok).

---

None of my WU on four computers are not able to upload...according to BOINC Log - Project servers may be temporarily down.

---

Upload failing here also.

Same here. Four completed WU's stuck "Uploading"

---

It's a certificate expiry or something. See https://boinc.bakerlab.org/rosetta/forum_thread.php?id=14006

---

same problem with LHC

It's a certificate expiry or something. See https://boinc.bakerlab.org/rosetta/forum_thread.php?id=14006

I'm not getting that warning here, but I do note the download server isn't running - no idea if that's related

Download server boinc-files.bakerlab.org Not Running

Never seen that server down before

---

It's a certificate expiry or something. See https://boinc.bakerlab.org/rosetta/forum_thread.php?id=14006

I'm not getting that warning here, but I do note the download server isn't running - no idea if that's related

Download server boinc-files.bakerlab.org Not Running

Never seen that server down before

Someone in another forum mentioned only Windows, not Linux or Mac, is affected.

---

Sid Celery wrote:

I'm not getting that warning here

You’ll only see it with http_debug selected in your Event Log options

Sid Celery wrote:

I'm not getting that warning here

You’ll only see it with http_debug selected in your Event Log options

I got it without that selected, I only have the first three ticked: file_xfer, sched_ops, task

---

Sorted - see the end of this thread: https://boinc.bakerlab.org/rosetta/forum_thread.php?id=14006

---